Laser scanning, 3D Printing, Inventor modelling and Design Services
Updates:
07/01/2026
New project added to the 'House and Garden Projects' and a new 'Automotive projects' page added.
Welcome to my hand-held laser scanning and modelling services !
I cater to individuals and companies alike. Whether you're looking to capture detailed measurements or create 3D models from existing real world geometry.
Custom skirting trim. A simple Quad section used here but any profile could be used.
Rather than damaging the existing plasterboard wall lining, the existing skirting will be sanded back, gaps filled and painted. 3D printed 25mm quad will be glued to the existing skirting to conceal the gaps between the new timber flooring and existing skirting.
Radiused external corners to remove sharp edges.
Radiused internal corner to help those robot vacuum cleaners since they can’t reach all the way into 90 degree internal corners.
What the installation will look like when completed including hiding the gap around the side of the fridge.
4 way splitter (or more if needed) for your garden irrigation poly pipe. Water comes in from the bottom elbow and exits in 4 directions at the top, no need for multiple 'T' joiners.
Existing 1/2" garden tap manifold setup to be replaced with a 1 piece 3D printed manifold incorporating hose connections. Threaded end caps with integral seals to blank off un-used outlets.
